A ground-fault circuit interrupter receptacle designed for outside use and able to dealing with a 20-ampere present supplies enhanced security towards electrical shocks in damp or moist places. Such receptacles are sometimes housed in weatherproof enclosures to guard inside elements from moisture and particles.
Safety towards electrical hazards in outside environments is essential. These specialised receptacles supply this security web by shortly reducing off energy within the occasion of a floor fault, thus decreasing the danger of great harm or electrocution. This expertise has advanced over time, changing into more and more dependable and important for contemporary electrical techniques, notably in areas uncovered to the weather. Their use is commonly mandated by constructing codes for outside installations, reflecting their acknowledged significance in stopping electrical accidents.
This dialogue will additional discover particular functions, set up greatest practices, and related regulatory requirements for these essential security gadgets.
1. Out of doors Security
Out of doors electrical security depends closely on applicable tools, notably in environments uncovered to moisture and the weather. A 20-amp weather-resistant GFCI outlet varieties a important element in mitigating dangers related to outside electrical installations. It supplies a vital layer of safety towards electrical hazards, making certain the protection of people and property.
-
Floor Fault Safety
The core operate of a GFCI is to detect floor faults, which happen when electrical energy takes an unintended path, typically by an individual or water. A GFCI immediately interrupts the circuit, considerably decreasing the danger of electrical shock. For outside use, this speedy response is essential, as moist situations improve the probability and severity of floor faults. For instance, a defective energy device utilized in damp situations may pose a deadly risk with out GFCI safety.
-
Climate Resistance
Out of doors environments expose electrical retailers to rain, snow, and temperature fluctuations. Climate-resistant GFCI retailers are designed with sturdy enclosures that stop moisture ingress, defending inside elements and making certain continued performance. This safety is important for sustaining a protected electrical provide, even in opposed situations. Think about panorama lighting; weather-resistant GFCIs guarantee dependable operation and forestall electrical hazards regardless of publicity to the weather.
-
Amperage Capability
A 20-amp score signifies the outlet’s capability to deal with increased present calls for. Out of doors functions typically contain energy instruments and home equipment requiring increased amperage. A correctly rated outlet prevents overheating and potential fireplace hazards, contributing to general security. Utilizing a lower-rated outlet for a high-current system may result in harmful overloading.
-
Code Compliance
Constructing codes typically mandate the usage of GFCI safety for outside receptacles. Adherence to those codes just isn’t merely a formality; it displays established security requirements primarily based on in depth analysis and expertise. Compliance with these requirements ensures a baseline stage of security for outside electrical installations. Utilizing non-compliant retailers can invalidate insurance coverage and create authorized liabilities.
These interconnected elements of a 20-amp weather-resistant GFCI outlet work collectively to supply a complete security answer for outside electrical techniques. From stopping electrical shock to withstanding the weather, these gadgets are important for safeguarding people and property in outside settings. Understanding and correctly using these retailers ensures a dependable and protected outside electrical atmosphere.
2. Shock Prevention
Electrical shock prevention is a paramount concern in outside environments the place publicity to moisture and conductive surfaces will increase threat. A 20-amp weather-resistant GFCI outlet performs a important function in mitigating this threat by speedy interruption of floor faults. Floor faults happen when electrical present deviates from its meant path, typically flowing by an individual or conductive water. The GFCI detects these deviations and inside milliseconds, journeys the circuit, reducing off the circulation of electrical energy. This speedy response considerably reduces the length and severity of potential shocks, stopping critical harm and even fatality. Think about a state of affairs involving a defective lawnmower: with no GFCI, contact with the energized steel casing in moist situations might be deadly. The GFCI’s swift motion minimizes the danger of such accidents.
The effectiveness of shock prevention depends on correct GFCI operation and set up. Common testing is essential to make sure the system stays practical. Climate-resistant enclosures shield the interior elements from moisture and particles, making certain dependable operation in outside situations. Moreover, the 20-amp score supplies ample capability for frequent outside home equipment and instruments, stopping overloading which may compromise the GFCI’s protecting capabilities. Correct grounding and adherence to electrical codes additional improve security, making certain the fault present has a low-resistance path to floor, facilitating speedy tripping of the GFCI.
Efficient shock prevention hinges on understanding the operate and limitations of GFCI retailers. Whereas they considerably scale back threat, they don’t remove it totally. Protected practices, resembling avoiding contact with electrical tools whereas moist or standing in water, stay important. GFCIs are a important element of a complete security technique, appearing because the final line of protection towards probably deadly electrical shocks in outside environments. Their correct set up, common testing, and adherence to related security tips are paramount for making certain a protected and practical outside electrical system. Failure to deal with these elements compromises the effectiveness of shock prevention measures, probably resulting in critical penalties.
3. Weatherproof Enclosure
A weatherproof enclosure is integral to the performance and security of a 20-amp weather-resistant GFCI outlet. The enclosure safeguards the interior elements, together with the delicate digital circuitry of the GFCI, from the detrimental results of environmental publicity. This safety ensures dependable operation and prolongs the lifespan of the outlet, notably in harsh outside situations. With no sturdy enclosure, moisture ingress may result in corrosion, quick circuits, and in the end, failure of the GFCI safety. For instance, an unprotected outlet uncovered to driving rain or gathered snow may malfunction, negating its security options and probably making a hazardous scenario. The enclosure acts as the primary line of protection towards such eventualities.
Weatherproof enclosures are designed to resist numerous environmental challenges. They sometimes characteristic sturdy building utilizing sturdy supplies like high-impact polycarbonate or UV-resistant plastics. Gaskets and seals stop water and mud penetration, sustaining a protected inside atmosphere. Moreover, the enclosure design incorporates options that stop the buildup of standing water, minimizing corrosion threat. The enclosure’s robustness immediately impacts the outlet’s skill to operate reliably in various climates, from excessive chilly to intense warmth and humidity. This reliability is important for outside functions the place constant GFCI safety is paramount, resembling powering pond pumps or outside lighting techniques.
The integrity of the weatherproof enclosure is important for sustaining the meant security advantages of a 20-amp weather-resistant GFCI outlet. Harm to the enclosure, resembling cracks or compromised seals, can negate its protecting operate, exposing inside elements to moisture and particles. Common inspection of the enclosure for harm is essential. Acceptable restore or substitute ought to be undertaken promptly to make sure continued safety. Understanding the important function of the weatherproof enclosure underscores its significance within the general security and performance of outside electrical installations. Its sturdy design and correct upkeep are important for making certain long-term reliability and safety towards electrical hazards in outside environments.
4. 20-ampere Capability
The 20-ampere capability designation of a 20 amp climate resistant GFCI outlet signifies its skill to soundly deal with electrical hundreds as much as 20 amperes. This score is essential for matching the outlet to the meant electrical demand of outside home equipment and tools. Connecting gadgets that draw greater than 20 amperes can result in overheating of the outlet’s wiring and inside elements, posing a hearth hazard. Moreover, overloading can harm the GFCI circuitry, probably compromising its protecting operate. As an illustration, utilizing a 20-ampere rated outlet to energy a high-draw equipment like a desk noticed exceeding this restrict creates a security threat. Conversely, underutilizing the capability by connecting low-draw gadgets to a 20-ampere outlet presents no security concern however could point out inefficient useful resource allocation.
The 20-ampere capability is intrinsically linked to the outlet’s general security profile. It ensures that the outlet can deal with the anticipated electrical load with out overheating or malfunctioning. This capability additionally performs a job within the GFCI’s performance. Overloading can disrupt the delicate electronics accountable for detecting floor faults, probably delaying or stopping the circuit interruption crucial to stop electrical shocks. Subsequently, deciding on the proper amperage score for an out of doors GFCI outlet is important for each fireplace prevention and efficient floor fault safety. Sensible functions requiring increased amperage, resembling powering electrical grills or sure energy instruments, necessitate the usage of a 20-ampere rated outlet. Making an attempt to make use of a lower-rated outlet for such functions compromises security and may harm the tools.
Understanding the importance of the 20-ampere capability is essential for protected and efficient outside electrical installations. Matching the outlet’s score to the meant load prevents overheating and ensures the correct operate of the GFCI safety. This understanding contributes to the prevention {of electrical} hazards and promotes the longevity of the outlet and linked gadgets. Neglecting this basic side {of electrical} security can result in vital penalties, highlighting the significance of cautious consideration when deciding on and putting in outside electrical tools.
5. Floor-Fault Safety
Floor-fault safety varieties the core security characteristic of a 20-amp weather-resistant GFCI outlet. This safety mechanism addresses a selected electrical hazard: floor faults. A floor fault happens when electrical present strays from its meant path, typically discovering a conduit to floor by an individual or conductive water. Such occurrences pose a major threat of electrical shock, notably in outside environments the place moisture is prevalent. A GFCI outlet constantly screens the present circulation within the sizzling and impartial wires. When a discrepancy, sometimes as small as 5 milliamperes, is detected, indicating present leakage to floor, the GFCI journeys the circuit, interrupting the circulation of electrical energy inside milliseconds. This speedy response drastically reduces the severity and length of a possible shock, stopping critical harm or electrocution. Think about a state of affairs the place a person working a strain washer in moist situations experiences a fault within the tools; if linked to a regular outlet, the ensuing shock might be deadly. A GFCI, nonetheless, would instantly interrupt the circuit, minimizing the danger of harm.
The effectiveness of ground-fault safety in a 20-amp weather-resistant GFCI outlet hinges on a number of elements. Correct set up, together with right wiring and grounding, is paramount. Common testing, sometimes utilizing the take a look at button on the outlet, ensures the GFCI mechanism stays practical. The weather-resistant enclosure safeguards the interior elements from environmental elements that might compromise the GFCI’s sensitivity or responsiveness. Furthermore, adhering to the 20-ampere capability prevents overloading, which may impede the GFCI’s skill to detect and reply to floor faults successfully. Sensible functions resembling powering pool pumps or outside lighting underscore the significance of dependable ground-fault safety. These functions typically contain publicity to water or damp situations, growing the danger of floor faults and highlighting the important security function of GFCI retailers.
Floor-fault safety, as carried out in a 20-amp weather-resistant GFCI outlet, supplies a important security layer for outside electrical techniques. Its skill to quickly interrupt floor faults considerably mitigates the danger {of electrical} shock, notably in environments liable to moisture. Sustaining the efficacy of this safety necessitates correct set up, common testing, and adherence to the outlet’s specified amperage score. Understanding the significance of ground-fault safety and its operational ideas is prime to making sure electrical security in outside settings. Failure to understand and keep this security characteristic can have critical penalties, underscoring the necessity for vigilance and adherence to security requirements.
6. NEC Compliance
NEC compliance is integral to the protected and authorized set up of a 20-amp weather-resistant GFCI outlet. The Nationwide Electrical Code (NEC) supplies a complete framework for electrical installations, outlining particular necessities aimed toward minimizing hazards. These necessities deal with important elements resembling wiring strategies, grounding procedures, and GFCI safety for particular places. Compliance with NEC requirements ensures the set up adheres to established security greatest practices, decreasing dangers related to electrical shocks, fires, and tools harm. As an illustration, the NEC mandates GFCI safety for outside receptacles, reflecting the elevated threat of floor faults in such environments. Ignoring these mandates compromises security and may result in authorized liabilities.
The connection between NEC compliance and a 20-amp weather-resistant GFCI outlet extends past mere adherence to laws. The NEC supplies particular steerage relating to applicable places for GFCI retailers, set up procedures, and testing necessities. For instance, the NEC specifies the required peak for outside receptacles, making certain accessibility whereas minimizing publicity to potential hazards like flooding. It additionally mandates the usage of weatherproof enclosures for outside installations, defending the outlet from environmental harm and sustaining its performance. Moreover, the NEC dictates the suitable wiring strategies for GFCI retailers, making certain correct grounding and minimizing the danger {of electrical} shock. Failure to adjust to these particular tips can negate the meant security advantages of the GFCI, probably creating harmful conditions. Think about an improperly grounded GFCI outlet; whereas showing practical, it may not journey throughout a floor fault, exposing people to electrical shock.
NEC compliance serves as a important benchmark for protected and dependable outside electrical installations incorporating 20-amp weather-resistant GFCI retailers. Adhering to those requirements minimizes dangers and ensures the meant security options of the GFCI function successfully. Understanding the connection between NEC compliance and the sensible utility of GFCI safety is important for electricians, contractors, and householders. This understanding ensures installations meet regulatory necessities and, extra importantly, supplies a protected and practical electrical system, mitigating potential hazards and selling electrical security in outside environments. Neglecting NEC compliance compromises security and undermines the integrity of {the electrical} system, probably resulting in critical penalties.
7. Correct Set up
Correct set up is paramount for making certain the protection and performance of a 20-amp weather-resistant GFCI outlet. Incorrect set up can negate the protecting options of the GFCI, probably resulting in electrical hazards. Moreover, improper set up can void warranties and create authorized liabilities. A complete understanding of set up greatest practices is due to this fact important.
-
Wiring and Connections
Correct wiring is prime. Incorrect connections can result in persistent tripping, failure to journey throughout a floor fault, and even create a shock hazard. The road (incoming energy) and cargo (outgoing energy to different gadgets) wires should be linked to the suitable terminals on the GFCI. Reversing these connections can render the GFCI ineffective. Moreover, safe connections are important to stop overheating and guarantee dependable operation.
-
Grounding
Efficient grounding is important for GFCI performance. The bottom wire supplies a low-resistance path for fault present to circulation again to {the electrical} panel, facilitating the speedy tripping of the GFCI. An improperly grounded outlet could not journey throughout a floor fault, exposing people to the danger of electrical shock. Grounding additionally protects towards electrical surges and voltage fluctuations.
-
Enclosure Integrity
The weatherproof enclosure should be correctly sealed and secured to stop moisture ingress. Compromised seals can result in corrosion of inside elements, probably affecting the GFCI’s efficiency and making a shock hazard. The enclosure must also be mounted securely to stop motion and pressure on the wiring connections. Utilizing applicable sealant and gaskets ensures a watertight seal, sustaining the integrity of the enclosure and defending the interior elements.
-
Testing Procedures
Submit-installation testing is essential for verifying correct GFCI operation. The take a look at and reset buttons on the GFCI ought to be used to substantiate performance. Testing ought to be carried out usually to make sure ongoing safety. A GFCI that fails to journey throughout testing signifies an issue requiring instant consideration. This testing confirms the GFCI’s skill to detect and interrupt floor faults, making certain its protecting operate is working as designed.
These interconnected aspects of correct set up collectively contribute to the dependable and protected operation of a 20-amp weather-resistant GFCI outlet. Adherence to greatest practices, knowledgeable by related electrical codes and producer directions, is important for making certain the meant security advantages of the GFCI are realized, mitigating the danger {of electrical} hazards in outside environments. Neglecting any of those parts can compromise the outlet’s protecting options, probably resulting in critical penalties.
8. Common Testing
Common testing is important for making certain the continued effectiveness of a 20-amp weather-resistant GFCI outlet. Environmental elements, resembling moisture and temperature fluctuations, can degrade the interior elements of a GFCI over time, probably affecting its skill to detect and interrupt floor faults. Moreover, bodily harm or inside put on also can compromise performance. Common testing verifies the GFCI’s responsiveness and ensures it stays able to offering important shock safety. A GFCI that fails to journey throughout testing signifies a malfunction requiring instant consideration. As an illustration, a GFCI uncovered to extended intervals of direct daylight and rain may expertise degradation of its inside circuitry. Common testing would establish such a malfunction, prompting crucial repairs or substitute, thus sustaining the meant security advantages.
The testing process itself is simple, sometimes involving urgent the “Check” button on the GFCI. This motion simulates a floor fault, and the GFCI ought to journey, interrupting the circuit. Subsequently, urgent the “Reset” button restores energy. The frequency of testing depends upon the atmosphere and utilization patterns. Shops uncovered to harsh situations or frequent use require extra frequent testing. Month-to-month testing is mostly really useful, whereas extra frequent testing could be crucial for retailers subjected to excessive climate or heavy utilization. Think about a GFCI powering a incessantly used outside workshop; weekly and even bi-weekly testing could be prudent given the upper utilization and potential for put on and tear. This proactive strategy ensures the GFCI’s protecting operate stays dependable.
Neglecting common testing can have critical penalties. A malfunctioning GFCI supplies a false sense of safety, leaving people weak to probably deadly electrical shocks. Common testing, a easy but essential upkeep process, validates the continued effectiveness of the GFCI, making certain it stays a dependable safeguard towards electrical hazards in outside environments. Understanding the significance of standard testing and integrating it into routine upkeep protocols is prime for sustaining a protected and practical outside electrical system. This proactive strategy considerably mitigates dangers and underscores a dedication to electrical security greatest practices.
9. Corrosion Resistance
Corrosion resistance performs a significant function within the long-term reliability and security of 20-amp weather-resistant GFCI retailers. Out of doors environments expose electrical elements to moisture, humidity, salt spray, and different corrosive brokers. These parts can degrade steel elements, compromising the structural integrity of the outlet and affecting its electrical performance. Corrosion can result in elevated resistance in electrical connections, producing warmth and probably inflicting fireplace hazards. Moreover, corrosion can harm the delicate inside elements of the GFCI, hindering its skill to detect and interrupt floor faults successfully. A corroded GFCI could fail to journey throughout a floor fault, negating its major security operate and exposing people to the danger of electrical shock. Think about a coastal set up the place salt spray is prevalent; with out sufficient corrosion resistance, the outlet’s steel elements may shortly degrade, resulting in untimely failure and potential security hazards.
A number of elements contribute to the corrosion resistance of those specialised retailers. The enclosure itself is often constructed from sturdy, non-corrosive supplies resembling UV-resistant polycarbonate or high-impact plastics. Inner elements, resembling contacts and terminals, are sometimes produced from corrosion-resistant metals like brass or stainless-steel. Moreover, protecting coatings and sealants additional improve corrosion resistance by making a barrier towards moisture and corrosive brokers. The usage of stainless-steel screws and {hardware} enhances these measures, making certain all uncovered steel elements resist corrosion. For instance, an outlet put in in a damp, industrial atmosphere advantages from these corrosion-resistant options, making certain extended performance and security regardless of difficult situations. The sensible utility of those design parts immediately interprets into enhanced security and longevity of the outlet, decreasing upkeep and substitute prices.
Corrosion resistance represents a important issue within the general efficiency and security of outside electrical installations. Selecting retailers particularly designed to resist corrosive environments ensures long-term reliability and minimizes the danger {of electrical} hazards. Understanding the impression of corrosion and the measures taken to mitigate its results is important for choosing and putting in applicable electrical tools for outside use. This consciousness promotes security and ensures the continued performance of important security gadgets like GFCI retailers in difficult outside environments. Neglecting corrosion resistance can compromise the protection and reliability of {the electrical} system, resulting in probably critical penalties.
Often Requested Questions
This part addresses frequent inquiries relating to 20-amp weather-resistant GFCI retailers, offering concise and informative responses to make clear potential uncertainties.
Query 1: Why is a weather-resistant GFCI crucial for outside use?
Out of doors environments expose electrical retailers to moisture, particles, and temperature fluctuations, growing the danger of floor faults and electrical hazards. Climate-resistant GFCI retailers characteristic sturdy enclosures that shield inside elements, making certain dependable operation and security in these difficult situations. Customary retailers lack this safety, making them unsuitable for outside use.
Query 2: How does a GFCI improve security in outside settings?
GFCI retailers constantly monitor electrical present circulation. Upon detecting a floor fault, which happens when electrical energy takes an unintended path, the GFCI journeys the circuit inside milliseconds, interrupting the circulation of electrical energy and stopping probably deadly shocks. This speedy response is essential in outside settings the place moisture will increase the danger of floor faults.
Query 3: What’s the significance of the 20-amp score?
The 20-amp score signifies the utmost present the outlet can safely deal with. Out of doors home equipment and instruments typically require increased amperage. A 20-amp score ensures the outlet can accommodate these calls for with out overheating or malfunctioning. Utilizing a lower-rated outlet for high-current gadgets can create a hearth hazard.
Query 4: How incessantly ought to a weather-resistant GFCI outlet be examined?
Common testing is essential to confirm continued GFCI performance. Month-to-month testing is mostly really useful, utilizing the “Check” and “Reset” buttons on the outlet. Shops subjected to frequent use or harsh situations could require extra frequent testing. Common testing confirms the GFCI’s skill to reply successfully to floor faults.
Query 5: Are there particular set up necessities for these retailers?
Adherence to all relevant electrical codes and producer directions is essential for correct set up. Right wiring, safe connections, efficient grounding, and correct sealing of the weatherproof enclosure are important for making certain the outlet features safely and reliably. Improper set up can negate the GFCI’s protecting options.
Query 6: Can any electrician set up a weather-resistant GFCI outlet?
Whereas many electricians possess the overall expertise for electrical work, specialised information and expertise with outside installations are really useful for putting in weather-resistant GFCI retailers. A certified electrician understands the nuances of outside wiring, grounding necessities, and correct enclosure sealing methods to make sure a protected and compliant set up.
Guaranteeing electrical security open air requires a complete understanding of the features and necessities of weather-resistant GFCI retailers. These FAQs present a place to begin for buying this data. Consulting with a certified electrician provides additional steerage tailor-made to particular set up necessities and native electrical codes.
Additional sections will delve into particular set up procedures, troubleshooting frequent points, and deciding on the suitable GFCI for numerous outside functions.
Important Suggestions for Using Climate-Resistant GFCI Shops
Optimizing security and efficiency of outside electrical techniques requires cautious consideration of varied elements associated to weather-resistant GFCI receptacles. The next ideas present sensible steerage for making certain efficient set up and operation.
Tip 1: Correct Amperage Choice: Make sure the outlet’s amperage score aligns with the meant load. Connecting gadgets exceeding the outlet’s capability poses fireplace hazards. A 20-ampere outlet ought to serve circuits requiring as much as 20 amperes. Overloading compromises security and may harm the GFCI circuitry.
Tip 2: Enclosure Integrity: Confirm the weatherproof enclosure stays intact and securely sealed. Cracks, broken seals, or unfastened fittings compromise safety towards moisture and particles, probably resulting in GFCI malfunction and security dangers. Common inspection and immediate restore or substitute are important.
Tip 3: Grounding Integrity: Correct grounding is important for GFCI performance. A devoted floor wire supplies a low-resistance path for fault present, enabling speedy circuit interruption. Confirm the bottom connection is safe and undamaged. Compromised grounding can negate the GFCI’s protecting capabilities.
Tip 4: Routine Testing: Frequently take a look at the GFCI utilizing the “Check” and “Reset” buttons. Month-to-month testing is really useful to substantiate performance. Extra frequent testing could also be crucial in harsh environments or with frequent use. Constant testing supplies assurance of continued safety towards floor faults.
Tip 5: Skilled Set up: Interact certified electricians skilled with outside electrical installations. Correct wiring, grounding, and enclosure sealing require experience to make sure compliance with electrical codes and producer specs. Skilled set up mitigates dangers related to improper set up.
Tip 6: Corrosion Mitigation: Think about environmental elements that contribute to corrosion, resembling salt spray or industrial pollution. Choose retailers with corrosion-resistant supplies and coatings to make sure long-term reliability and security in harsh environments. Common inspection for indicators of corrosion is really useful.
Tip 7: Load Administration: Keep away from overloading the circuit linked to the GFCI outlet. Distribute high-draw home equipment throughout a number of circuits to stop exceeding the outlet’s capability. Overloading can harm the GFCI and create fireplace hazards.
Adhering to those tips contributes considerably to the protected and efficient operation of outside electrical techniques. These measures guarantee dependable GFCI safety, mitigating dangers and selling electrical security in outside environments. Constant vigilance and adherence to security protocols are essential for sustaining a safe and practical outside electrical infrastructure.
This compilation of sensible steerage lays the groundwork for a complete understanding of outside GFCI utilization. The next conclusion will synthesize these ideas and reinforce the significance of prioritizing electrical security in outside settings.
Conclusion
Safeguarding people and property from electrical hazards in outside environments necessitates a complete strategy to electrical security. Specialised receptacles, resembling these designed for outside use with ground-fault circuit interruption and a 20-ampere score, play a important function on this technique. Correct choice, set up, and upkeep of those gadgets are essential for making certain their meant security advantages. This dialogue has explored the important elements of those gadgets, from their core performance and protecting options to set up greatest practices and regulatory compliance. Key takeaways embrace the significance of weatherproof enclosures, the importance of the amperage score, the need of correct grounding, and the very important function of standard testing.
Electrical security ought to by no means be compromised, particularly in environments the place moisture and publicity to the weather improve dangers. Investing in sturdy, correctly put in, and meticulously maintained security gadgets represents a dedication to mitigating these dangers. Continued adherence to security requirements and greatest practices, mixed with ongoing technological developments in electrical security, will additional improve safety and decrease electrical hazards in outside settings. Diligence in these areas ensures not solely compliance but in addition the preservation of life and property.
